65 manganese steel vibrating mine screen with complete models

Stainless steel screens can be divided into silk screens and metal wire screens according to raw materials. Silk screens are original screens, and stainless steel screens are modified from silk screens.

Even if it does not break, the screen material will yield due to the increased load of drill cuttings during use, and the screen will be partially dented, accumulation of cuttings, and then the screen will be destroyed.

At this time, a fixed screen should be used to dewater at a relatively low flow rate. Particle size and particle size characteristics Particle size distribution is an important factor, especially for fine-grained materials.

The 65 manganese steel vibrating mine screen has a complete range of models with good wear resistance and long service life. Its wear resistance is ~ times that of steel screens and more than that of ordinary rubber screens. The maintenance workload is small, and the polyurethane screens are not easy to damage. The service life is long, so it can greatly reduce the environmental protection, low maintenance volume and the loss of maintenance.

Some large formal wire mesh manufacturers in Anping use fully automatic welding machines to produce, while a small factory uses manual welding, and it is usually difficult to maintain the quality.

The dehydration effect depends to a large extent on the formed filter bed. It is either composed of coarse particles falling on the screen surface, or bridged by fine particles on the screen surface. In order to obtain higher dehydration efficiency, a certain proportion must be maintained The particles are larger than the average particle size.

The maintenance workload is small, the polyurethane screen is not easy to be damaged, and the service life is long. Therefore, the large-scale can greatly reduce the maintenance volume and the total cost of shutdown and maintenance. The total cost is low, although the polyurethane screen of the same specification (area) is higher than the stainless steel screen. ), but because the life of the polyurethane screen is ~ times that of the stainless steel screen, and the number of maintenance and replacement of specifications is small, the total cost is not high, and it is economically cost-effective. If there is a strong impact feeding method, it is more likely to cause damage to the mesh surface and fatigue. A buffer hopper must be installed to reduce the impact on the stainless steel screen surface and reduce the degree of damage. Polyurethane sieve panels are divided into four types of structure: inlay type, bolt connection, bead connection, and screen hook connection. For example, bead connection type: Please place the sieve plate on the screen surface first, and then install it according to the support beam structure of the screen.

It is generally believed that when the volume solid-liquid ratio is: when the particle content is greater than the average particle size, it should account for 0%. Polyurethane stainless steel slotted sieve is the main product of our company. Based on the concept of serving every customer, we have rich technology and experience Create products that meet the needs of the public.

Next, I will explain the performance of the polyurethane stainless steel slotted screen. Because the polyurethane elastic polyurethane stainless steel slotted screen uses steel wire as the skeleton material, and the polyurethane itself has a high elastic modulus, high impact absorption and wear resistance , So it has a high tensile strength.